| For All Your Blank
Shooting Needs Official Blank of CMSA, used at all National and World Competition |
| * 45
Cowboy Mounted Shooting Blanks are CMSA Certified #24
approved. The Original J&B Crimp Technology mounted shooting blanks
are designed for maximum sensitivity and consistent ignition. We use
only soft primers that are designed to discharge even with the most
sensitive light hammer action jobs including those off center hits.
These are the longest shooting blank as allowed by CMSA rules.
Remember the competition can look like us, but they can't perform like
us. Cases are head stamped with the Original “JB CMSA #24” Logo. * 45 Rifle Mounted Shooting Blanks
– For use in .44 .44/40 and .45
caliber rifles and carbines. These are a 3 in 1 cartridge with a
crimped end for easy feeding in all makes and models rifles. They are
also the farthest shooting blank as allowed by CMSA rules.
* 45 Training Blanks – Great while your horse is in training, where low noise is required, or for indoor arena use. They can break balloons up to about 10 feet but without the loud report or huge cloud of smoke. Designed, developed and tested at Outlaw Annie's Boot Camps. 45 Cases are color coded flecked blue. * •45 Practice Blanks – For breaking balloons either mounted or on the ground these are the same quality as the crimped Mounted Shooting Blanks, except they are not certified for use in WPQ competitions but are a great inexpensive way to practice or use in those jackpots shoots. * •45 Show Blanks – For Re-enactment purposes only. These are NOT made to break balloons but as a safer blank for use in re-enactments, gun fights, skirmish’s etc. Made in full or half loads. Lots of smoke and noise. .45 cases are color coded flecked red. *12 Ga. Shotgun Mounted Shooting Blanks – For use in mounted or ground shooting for breaking balloons. Maximum range of 20 feet. * •12 Ga. Shotgun Show Blanks – For re-enactment purpose only. These are NOT made to break balloons, but as a safer blank for re-enactments, gun fights, skirmish’s etc. Lots of smoke and noise. You’ll like the sound of these loads. * 45 Dummy Rounds – For looks only, will not fire. Fill those empty belt loops with some good looking shells * JB Custom Hammer Turndowns –
We will turn down the hammers on your existing Colt and Colt
clone revolvers. All hammers are heated and turned down to meet exact tolerances, re-heat treated and polished. Make
shooting easier and faster. (Sorry Rugers cannot be reworked.)
* JB Custom Firing Pins – Replace those worn out - short firing pins. Most misfires are caused by firing pins being too short. Many new guns are shipped with short pins combined with light action jobs causes many a misfire. We make custom pins that are longer almost reaching the cylinder itself. Spring kits available too. Orders are
packaged in disposable boxes of 25, 50,
100, 500, 1000.
All
mounted shooting cases are head-stamped with the original J&B to
insure quality and authenticity. We use all new brass, no reloads or
need to return empty cases. Totally disposable or recyclable
|
 |
 |
| PRICE LIST |
|
Pistol CMSA
Certified #24
|
.37 cents each
|
Rifle CMSA Certified #24
|
.55 cents each |
Training
blanks
|
.30 cents each |
Practice Blanks
|
.30 cents each |
Show Blanks
|
.30 cents each |
Shotgun Blanks
|
.50 cents each |
Dummy Rounds
|
.50 cents each |
Hammer
Turndowns
|
$45.00 each
|
Firing pins
|
$20.00 each |
Spring Kits
|
$25.00 each |
|
|